EMC Shielding Shelter tent
Theory of operation, Introduction
GTEMCELL offer A Faraday’s principle based chamber for electromagnetic shielding, an EMC Shielding Shelter.
Our EMC shielding shelter is a tent made of special coupled metalized Cu-Ni tissue offer easy way to make a screened ambient whenever needs a shielding solutions with a light weight for transportation and fast installation GTEMCELL is there.
The tent structure of our EMC Shielding Shelter is made in aluminium frame tube or in steel rods customized in dimensions and openings.
The open side (door)
It is made with a Velcro electrically conductive and with a ZIP metal with conductive fabric as support to ensure the conductivity of the two side of the part of the tent. An adequate size of overlapping of the conductive fabric ensures the good shielding .
The fabric is covered with a coating flame retardant also able to ensure a good abrasion resistance to the conductive surface. The flexibility is tested according AFNOR G52-020 .
Window: A ready-to-use metal mesh fabric panel offer a view from outside and inside or viceversa; size Aprx. 300 mm x 300 mm
Inside on the fabric surface
The electroless process offer a strong adhesion of the nickel 100% to the surface of polyester yarn all around .On the macro photo the deposition is uniform
Quality test and shielding performance.
The average shielding performances is around 48 dB attenuation with peaks of 65 dB around 200 MHz and 400 MHz. Most of the results depends from the open side dimensions and the window if installed .
Size: Europallet 120x80x80cm, + 300x15x15cm, Weight: 100Kg. Approx.
Our mission is “to offer top-grade products and excellent service”.
Tel: +39 045 7731 547
Mob: +39 320 0470 064
Fax: +39 0541 1641 013
GTEM of E. S. Benites
106, Ponte Str., 37015
Sant’Ambrogio di Valpolicella (VR)